IT업계에 종사하는 분들은 치열한 경쟁을 많이 느낄것입니다. 치열한 경쟁속에서 자신의 위치를 보장하는 길은 더 많이 배우고 더 많이 노력하는것 뿐입니다.국제적으로 인정받은 IT인증자격증을 취득하는것이 제일 중요한 부분이 아닌가 싶기도 합니다. 다른 분이 없는 자격증을 내가 소유하고 있다는 생각만 해도 뭔가 안전감이 느껴지지 않나요? 더는 시간낭비하지 말고ITExamDump의Oracle인증 1Z0-050덤프로Oracle인증 1Z0-050시험에 도전해보세요.
ITExamDump 에서 출시한Oracle인증1Z0-050 덤프는Oracle인증1Z0-050 실제시험의 출제범위와 출제유형을 대비하여 제작된 최신버전 덤프입니다. 시험문제가 바뀌면 제일 빠른 시일내에 덤프를 업데이트 하도록 최선을 다하고 있으며 1년 무료 업데이트서비스를 제공해드립니다. 1년 무료 업데이트서비스를 제공해드리기에 시험시간을 늦추어도 시험성적에 아무런 페를 끼치지 않습니다. ITExamDump에 믿음을 느낄수 있도록 구매사이트마다 무료샘플 다운가능기능을 설치하였습니다.무료샘플을 체험해보시고ITExamDump을 선택해주세요.
모두 아시다시피Oracle 1Z0-050인증시험은 업계여서도 아주 큰 비중을 차지할만큼 큰 시험입니다. 하지만 문제는 어덯게 이 시험을 패스할것이냐이죠.Oracle 1Z0-050인증시험패스하기는 너무 힘들기 때문입니다. 다른사이트에 있는 자료들도 솔직히 모두 정확성이 떨어지는건 사실입니다. 하지만 우리ITExamDump의 문제와 답은 IT인증시험준비중인 모든분들한테 필요한 자료를 제공할수 있습니디. 그리고 중요한건 우리의 문제와 답으로 여러분은 한번에 시험을 패스하실수 있습니다.
Oracle인증 1Z0-050시험은 등록하였는데 시험준비는 아직이라구요? Oracle인증 1Z0-050시험일이 다가오고 있는데 공부를 하지 않아 두려워 하고 계시는 분들은 이 글을 보는 순간 시험패스에 자신을 가지게 될것입니다. 시험준비 시간이 적다고 하여 패스할수 없는건 아닙니다. ITExamDump의Oracle인증 1Z0-050덤프와의 근사한 만남이Oracle인증 1Z0-050패스에 화이팅을 불러드립니다. 덤프에 있는 문제만 공부하면 되기에 시험일이 며칠뒤라도 시험패스는 문제없습니다. 더는 공부하지 않은 자신을 원망하지 마시고 결단성있게ITExamDump의Oracle인증 1Z0-050덤프로 시험패스에 고고싱하세요.
시험 번호/코드: 1Z0-050
시험 이름: Oracle (Oracle Database 11g: New Features for Administrators)
여러분이 어떤 업계에서 어떤 일을 하든지 모두 항상 업그레이되는 자신을 원할 것입니다.,it업계에서도 이러합니다.모두 자기자신의 업그레이는 물론 자기만의 공간이 있기를 바랍니다.전문적인 IT인사들은 모두 아시다싶이Oracle 1Z0-050인증시험이 여러분의 이러한 요구를 만족시켜드립니다.그리고 우리 ITExamDump는 이러한 꿈을 이루어드립니다.
1Z0-050 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-050.html
NO.1 View the Exhibit exhibit1 to examine the series of SQL commands. View the Exhibit exhibit2 to
examine the plans available in the SQL plan baseline. The baseline in the first row of the Exhibit is
created when OPTIMIZER_MODE was set to FIRST_ROWS. Which statement is true if the SQL
query in exhibit1 is executed again when the value of OPTIMIZER_MODE is set to FIRST_ROWS?
A.The optimizer uses a new plan because none of the plans in the exhibit2 are fixed plans.
B.The optimizer uses the plan in the second row of the exhibit2 because it is an accepted plan.
C.The optimizer uses the plan in the first row of the exhibit2 because it is the latest generated plan.
D.The optimizer uses the plan in the first row of the exhibit2 because OPTIMIZER_MODE was set to
FIRST_ROW during its creation.
Correct:B
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
NO.2 Which statement describes the effect of table redefinition on the triggers attached to the table?
A.All triggers on the table remain valid.
B.All triggers on the table are invalidated and are automatically revalidated with the next DML execution
on the table.
C.All triggers on the table are invalidated and must be manually recompiled before the next DML
execution on the table.
D.Only triggers that are affected by the changes to the structure of the table are invalidated and
automatically revalidated with the next DML execution on the table.
Correct:B
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
NO.3 View the Exhibit. Examine the following command that is executed for the TRANSPORT table in
the SH schema: SQL> SELECT DBMS_STATS.CREATE_EXTENDED_STATS('sh', 'customers_obe',
'(country_id, cust_state_province)') FROM dual; Which statement describes the significance of
this command?
A.It collects statistics into the pending area in the data dictionary.
B.It creates a virtual hidden column in the CUSTOMERS_OBE table.
C.It collects statistics with AUTO_SAMPLE_SIZE for ESTIMATE_PERCENT.
D.It creates a histogram to hold skewed information about the data in the columns.
Correct:B
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
NO.4 Which two statements about workload capture and replay operations are true? (Choose two.)
A.The clients must be created manually on the test machines to perform more realistic testing.
B.Restart the database in RESTRICTED mode before beginning workload replay to enable a clean state
for workload replay.
C.Restart the database in RESTRICTED mode before beginning workload capture to enable a clean state
for capturing the workload.
D.The application state of the capture system must be identical to the application state of the replay
system when the workload replay begins.
Correct:C D
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
NO.5 Which statement is true regarding the VALIDATE DATABASE command?
A.It checks the database for intrablock corruptions only.
B.It checks for block corruption in the valid backups of the database.
C.It checks the database for both intrablock and interblock corruptions.
D.It checks for only those corrupted blocks that are associated with data files.
Correct:A
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
NO.6 You are managing an Oracle Database 11g database with the ASM storage. The database is
having big file tablespaces. You want files to open faster and less memory to be used in the
shared pool to manage the extent maps. What configuration would you effect to achieve your
objective? (Choose all that apply.)
A.Set the ASM compatibility attribute for the ASM disk group to 11.1.0.
B.Set the RDBMS compatibility attribute for the ASM disk group to 11.1.0.
C.Set the COMPATIBLE initialization parameter for the ASM instance to 11.1.0.
D.Set the COMPATIBLE initialization parameter for the database instance to 11.1.0.
Correct:A D
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
NO.7 USER_DATA is a nonencrypted tablespace that contains a set of tables with data. You want to
convert all existing data in the USER_DATA tablespace and the new data into the encrypted format.
Which methods would you use to achieve this? (Choose all that apply.)
A.Use Data Pump to transfer the existing data to a new encrypted tablespace.
B.Use ALTER TABLE..MOVE to transfer the existing data to a new encrypted tablespace.
C.Use CREATE TABLE AS SELECT to transfer the existing data to a new encrypted tablespace.
D.Enable row movement for each table to be encrypted and then use ALTER TABLESPACE to encrypt
the tablespace.
E.Encrypt the USER_DATA tablespace using the ALTER TABLESPACE statement so that all the data in
the tablespace is automatically encrypted.
Correct:A B C
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
NO.8 Identify the two direct sources from where SQL plans can be loaded into the SQL plan baselines.
(Choose two.)
A.Cursor cache
B.Stored outline
C.SQL Tuning Set
D.Automatic Workload Repository (AWR) snapshots
Correct:A C
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
NO.9 Which steps are mandatory to enable Direct NFS? 1. Mount all required file systems using the
kernel NFS driver. 2. Create an oranfstab file containing the attributes for each NFS server to be
accessed using Direct NFS. 3. Replace the ODM library libodm11.so_stub with libodm11.so.
A.2 and 3
B.1 and 3
C.1 and 2
D.1, 2 and 3
Correct:B
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
NO.10 You installed Oracle Database 11g and are performing a manual upgrade of the Oracle9i
database. As a part of the upgrade process, you execute the following script: SQL>@utlu111i.sql
Which statement about the execution of this script is true?
A.It must be executed from the Oracle Database 11g environment.
B.It must be executed only after the SYSAUX tablespace has been created.
C.It must be executed from the environment of the database that is being upgraded.
D.It must be executed only after AUTOEXTEND is set to ON for all existing tablespaces.
E.It must be executed from both the Oracle Database 11g and Oracle Database 9i environments.
Correct:C
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
NO.11 View the Exhibit to examine the parameter values. You are planning to set the value for the
MEMORY_TARGET parameter of your database instance. What value would you assign?
A.90 MB
B.272 MB
C.362 MB
D.1440 MB
Correct:C
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
NO.12 Which three statements about performance analysis by SQL Performance Analyzer are true?
(Choose three.)
A.It detects changes in SQL execution plans.
B.It produces results that can be used to create the SQL plan baseline.
C.The importance of SQL statements is based on the size of the objects accessed.
D.It generates recommendations to run SQL Tuning Advisor to tune regressed SQLs.
E.It shows only the overall impact on workload and not the net SQL impact on workload.
Correct:A B D
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
NO.13 Evaluate the following block of code: BEGIN DBMS_NETWORK_ACL_ADMIN.CREATE_ACL ( acl
=> 'mycompany-com-permissions.xml', principal => 'ACCT_MGR', is_grant => TRUE, privilege =>
'connect'); DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL ( acl =>
'mycompany-com-permissions.xml', host => '*.mycompany.com'); END; What is the outcome of
the above code?
A.It produces an error because a fully qualified host name needs to be specified.
B.It produces an error because the range of ports associated with the hosts has not been specified.
C.It creates an access control list (ACL) with the user ACCT_MGR who gets the CONNECT and
RESOLVE privileges.
D.It creates an access control list (ACL) with the user ACCT_MGR who gets the CONNECT privilege but
not the RESOLVE privilege.
Correct:C
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
NO.14 You are managing the APPPROD database as a DBA. You plan to duplicate this database in the
same system with the name DUPDB. You issued the following RMAN commands to create a
duplicate database: RMAN> CONNECT target sys/sys@APPPROD RMAN> DUPLICATE TARGET
DATABASE TO dupdb FROM ACTIVE DATABASE DB_FILE_NAME_CONVERT
'/oracle/oradata/prod/', '/scratch/oracle/oradata/dupdb/' SPILE PARAMETER_VALUE_CONVERT
'/oracle/oradata/prod/', '/scratch/oracle/oradata/dupdb/' SET SGA_MAX_SIZE = '300M' SET
SGA_TARGET = '250M' SET LOG_FILE_NAME_CONVERT '/oracle/oradata/prod/redo/',
'/scratch/oracle/oradata/dupdb/redo/'; Which three are the prerequisites for the successful
execution of the above command? (Choose three.)
A.The source database should be open.
B.The target database should be in ARCHIVELOG mode if it is open.
C.RMAN should be connected to both the instances as SYSDBA.
D.The target database backups should be copied to the source database backup directories.
E.The password file must exist for the source database and have the same SYS user password as the
target.
Correct:B C E
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
NO.15 Which two are the prerequisites to enable Flashback Data Archive? (Choose two.)
A.Undo retention guarantee must be enabled.
B.Database must be running in archivelog mode.
C.Automatic undo management must be enabled.
D.The tablespace on which the Flashback Data Archive is created must be managed with Automatic
Segment Space Management (ASSM).
Correct:C D
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
NO.16 Which statements are true regarding the concept of problems and incidents in the fault
diagnosability infrastructure for Oracle Database 11g? (Choose all that apply.)
A.The problem key is the same as the incident number.
B.Every problem has a problem key, which is a text string that describes the problem.
C.The database makes an entry into the alert log file when problems and incidents occur.
D.The database sends an incident alert to the Oracle Enterprise Manager Database Home page.
E.Only the incident metadata and dumps are stored in the Automatic Diagnostic Repository (ADR).
Correct:B C D
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
NO.17 You want to take the backup of the USERS tablespace. It has a single data file of 900 MB.. You
have tape drives of 300 MB each. The SBT channel is configured for the RMAN. To accomplish the
backup, you issued the following RMAN command: RMAN> BACKUP SECTION SIZE 300M
TABLESPACE users; Which two statements are true regarding the execution of the above
command? (Choose two.)
A.The backup piece size will be limited to 300 MB.
B.The operation is accomplished using the default channel available.
C.The RMAN parallelizes the backup although the parallelism is not set for a channel.
D.Three channels for the tape drive must be configured by setting the parallelism to three.
Correct:A B
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
NO.18 You are managing an Oracle Database 11g database. You want to take a backup on tape drives
of the USERS tablespace that has a single data file of 900 MB. You have tape drives of 300 MB
each. To accomplish the backup, you issued the following RMAN command: RMAN>BACKUP
SECTION SIZE 300M TABLESPACE users; What configuration should be effected to accomplish
faster and optimized backups by using the above command?
A.The SBT channel must be configured, with the MAXPIECESIZE set to 300 MB.
B.The SBT channel must be configured, with the parallelism setting for the SBT device set to 3.
C.The COMPATIBLE initialization parameter for the database instance must be set to at least 10.0.
D.The SBT channel must be configured, with the default parallelism setting for the SBT device set to 1.
Correct:B
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
NO.19 When executing a SQL workload, you choose to generate execution plans only, without
collecting execution statistics. Which two statements describe the implications of this? (Choose
two.)
A.It produces less accurate results of the comparison analysis.
B.It automatically calls the SQL Tuning Advisor for recommendations.
C.It shortens the time of execution and reduces the impact on system resources.
D.Only the changes in the execution plan, and not performance regression, are detected.
Correct:A C
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
NO.20 Which tasks can be accomplished using the Enterprise Manager Support Workbench in Oracle
Database 11g? (Choose all that apply.)
A.Generate reports on data failure such as data file failures.
B.You can package and upload diagnostic data to Oracle Support.
C.You can track the Service Request (SR) and implement repairs.
D.You can manually run health checks to gather diagnostic data for a problem.
Correct:B C D
Oracle dumps 1Z0-050 1Z0-050인증 1Z0-050
ITExamDump의 Oracle인증 1Z0-050덤프를 구매하시면 1년동안 무료 업데이트서비스버전을 받을수 있습니다. 시험문제가 변경되면 업데이트 하도록 최선을 다하기에ITExamDump의 Oracle인증 1Z0-050덤프의 유효기간을 연장시켜드리는 셈입니다.퍼펙트한 구매후는 서비스는ITExamDump의 Oracle인증 1Z0-050덤프를 구매하시면 받을수 있습니다.
댓글 없음:
댓글 쓰기