2014년 1월 27일 월요일

도비 Symantec ST0-12W 시험

ITExamDump에서는Symantec 인증ST0-12W시험대비덤프를 발췌하여 제공해드립니다. Symantec 인증ST0-12W시험대비덤프에는 시험문제의 모든 예상문제와 시험유형이 포함되어있어 시험준비자료로서 가장 좋은 선택입니다. ITExamDump에서 제공해드리는 전면적인Symantec 인증ST0-12W시험대비덤프로Symantec 인증ST0-12W시험준비공부를 해보세요. 통과율이 100%입니다.

만약ITExamDump를 선택하였다면 여러분은 반은 성공한 것입니다. 여러분은 아주 빠르게 안전하게 또 쉽게Symantec ST0-12W인증시험 자격증을 취득하실 수 있습니다. 우리ITExamDump에서 제공되는 모든 덤프들은 모두 100%보장 도를 자랑하며 그리고 우리는 일년무료 업데이트를 제공합니다.

시험 번호/코드: ST0-12W
시험 이름: Symantec (Veritas Cluster Server 5 for Windows (STS))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 100 문항
업데이트: 2014-01-26

Symantec인증 ST0-12W시험패스는 IT업계종사자들이 승진 혹은 연봉협상 혹은 이직 등 보든 면에서 날개를 가해준것과 같습니다.IT업계는 Symantec인증 ST0-12W시험을 패스한 전문가를 필요로 하고 있습니다. ITExamDump의Symantec인증 ST0-12W덤프로 시험을 패스하고 자격증을 취득하여 더욱더 큰 무대로 진출해보세요.

지금 같은 상황에서 몇년간Symantec ST0-12W시험자격증만 소지한다면 일상생활에서많은 도움이 될것입니다. 하지만 문제는 어떻게Symantec ST0-12W시험을 간단하게 많은 공을 들이지 않고 시험을 패스할것인가이다? 우리ITExamDump는 여러분의 이러한 문제들을 언제드지 해결해드리겠습니다. 우리의ST0-12W시험마스터방법은 바로IT전문가들이제공한 시험관련 최신연구자료들입니다. 우리ITExamDump 여러분은ST0-12W시험관련 최신버전자료들을 얻을 수 있습니다. ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.

ST0-12W 덤프무료샘플다운로드하기: http://www.itexamdump.com/ST0-12W.html

NO.1 Several application service groups require their own virtuallP addresses to share a single NIC on each
system in a cluster. Which agent reduces the overhead associated with monitoring the NIC’ s
status?
A. proxy
B. MultiNICB
C. NIC
D. phantom
Answer: A

Symantec기출문제   ST0-12W   ST0-12W덤프

NO.2 You have one of three systems in a cluster up and running Veritas Cluster Server. When the second
system starts, it finds that it has a valid Veritas Cluster Server configuration file. This configuration is
different than the one on the first system.
What happens?
A. Verltas Cluster Server uses the one from the first system.
B. Veritas Cluster Server uses the one from the second system.
C. Veritas Cluster Server will integrate the files.
D. Veritas Cluster Server will wait for the third system.
Answer:A

Symantec   ST0-12W인증   ST0-12W dumps   ST0-12W

NO.3 Where are configuration changes maintained in a running Veritas Cluster Server cluster?
A. memory on ~II systems
B. disk on all systems
C. memory on quorum system
D. disk on quorum system
Answer:A

Symantec최신덤프   ST0-12W dumps   ST0-12W

NO.4 You are modifying the cluster configuration while the cluster is stopped. You have edited and verified
the main.cf file on system SysA. Which command do you use to start the cluster with the new
configuration on system SysA?
A. hastart
B. haclus -rebuild .Imain .cr
C. hasys ?start SysA
D. hareconfig
Answer:A

Symantec dumps   ST0-12W   ST0-12W

NO.5 Four servers available for clustering are located in two buildings. Each building contains two servers
and the servers are on the same network. There are two disk arrays to which all four servers have shared
data access. Which type of cluster topology is required?
A. campus cluster
B. global cluster
C. shared nothing cluster
D. split brain cluster
Answer:A

Symantec   ST0-12W   ST0-12W

NO.6 You are designing a high availability solution for an important new application and you are in the
process of identifying single points of failure in the design. What are two possible single points of failure
that can be addressed by Veritas Cluster Server? (Choose two.)
A. network
B. stor~ge
C. processors
D. memory
E. environment
Answer:A,B

Symantec   ST0-12W   ST0-12W   ST0-12W인증   ST0-12W

NO.7 You have two of three systems in a cluster up and running Veritas Cluster Server. When the third
system starts, it finds that it has a valid Veritas Cluster Server configuration file. This configuration is
different than the one on the first two systems.
How does Veritas Cluster Server handle this situation?
A. It will use the configur~tion from the first two systems.
B. It will use the configuration from the third system.
C. It will integrate the files to resolve the differences.
D. The third node will be unable to start.
Answer:A

Symantec   ST0-12W   ST0-12W   ST0-12W

NO.8 Which two tasks can be performed to improve the overall fault tolerance of a Veritas Cluster Server
cluster? (Choose two.)
A. connect e ach system in the cluster to separate power sources DB. mirror the os disk of e ach system
in the cluster
C. connect a tape drive to each system in the cluster
D. add a local disk array to each system in the cluster
E. add CPUs to each node in the cluster
Answer:A,B

Symantec덤프   ST0-12W   ST0-12W최신덤프   ST0-12W인증   ST0-12W덤프

NO.9 What are two valid settings for the ManageFaults service group attibute? (Choose two.) A . All
B. None
C.Priority
D. MonitorOnly
E. Manual
Answer: A,B,

Symantec   ST0-12W   ST0-12W최신덤프   ST0-12W   ST0-12W

NO.10 What is the Veritas Cluster Server term for how a system joining an existing cluster retrieves the cluster
configuration?
A. remote build
B. local build
C. onetime build
D. initial build
Answer:A

Symantec   ST0-12W   ST0-12W dumps   ST0-12W인증   ST0-12W덤프

NO.11 What are three possible types of Veritas Cluster Server service groups? (Choose three.)
A. Failover
B. Hybrid
C. Parallel
D. Singlenode
E. OnOnly
Answer: A,B,C

Symantec   ST0-12W   ST0-12W

NO.12 A service group with the FaiioverPolicy set to Priority has a fault and is failing over. The group fail over
to the system with the __ .
A. lowest as siqne d value in the groups SystemList
B. highest assigned value in the groups SystemList
C. lowest number of service groups currently online
D. highest available capacity in the groups SystemList
Answer:A

Symantec   ST0-12W pdf   ST0-12W   ST0-12W

NO.13 What is the Veritas Cluster Server service that maintains resource configuration and state
information?
A. h~d
B. hastate
C. haconf
D.hacf
Answer: A

Symantec dumps   ST0-12W dumps   ST0-12W덤프   ST0-12W

NO.14 Which characteristic must an application have in order to be managed by Veritas Cluster Server?
A. It must be re startable to ~ known state after failure and tattover.
B. It must be startable by a user other than the system account.
C. It must be a stateless application.
D. It must be capable of running on all systems simultaneously.
Answer:A

Symantec자료   ST0-12W   ST0-12W   ST0-12W   ST0-12W

NO.15 Which three elements must be moved from the failed server to the takeover server for network users to
resume access to the database when a failover occurs? (Choose three.)
A. the vtrtuat ts address
B. the set of processes
C. the Ethernet address
D. the public key
E. the disk group
Answer:A,B,E

Symantec인증   ST0-12W   ST0-12W pdf   ST0-12W

NO.16 You are tasked with making an existing production system highly available with Veritas Cluster Server.
You have already verified that the hardware is compatible with Veritas Cluster Server. You are now
evaluating the software on the systems for Veritas Cluster Server compatibility.
What must be verified for Veritas Cluster Server compatibility?
A. the oper~ting system version
B. the volume management software version
C. the NIC driver version
D. the file system version
Answer:A

Symantec   ST0-12W dump   ST0-12W덤프   ST0-12W

NO.17 A process is manually shut down to test an automatic failover of a configured Process resource. The
service group then fails over to another system. What should be cleared before bringing the service group
back to the system on which the test was originally conducted?
A. resource
B. attribute
C. cluster
D. system
Answer:A

Symantec   ST0-12W dump   ST0-12W pdf   ST0-12W

NO.18 You want to validate operation after installing, configuring, and starting Veritas Cluster Server. Which
two GAB ports should be shown as running? (Choose two.)
A. a
B. c
C. h
D. S
E. V
Answer:A,C

Symantec dump   ST0-12W인증   ST0-12W최신덤프   ST0-12W자료   ST0-12W시험문제   ST0-12W

NO.19 Which Symantec product feature or attribute allows for the same application to be started
simultaneously on different systems?
A. parallet service groups
B. Veritas FlashSnap
C. the online local dependency
D. the parallelstart group attribute
Answer:A

Symantec   ST0-12W자료   ST0-12W   ST0-12W시험문제   ST0-12W

NO.20 Which command do you use to change a service group attribute in a running cluster?
A. h~grp ?modify
B. hagrp ?change
C. hamodify ?group
D. hamodify ?attribute
Answer:A

Symantec인증   ST0-12W dump   ST0-12W   ST0-12W

ITexamdump의 CUR-051덤프의 VCE테스트프로그램과 70-415덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1Z1-061시험에 대비한 고품질 덤프와 1Z0-807시험 최신버전덤프를 제공해드립니다. 최고품질 70-247시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/ST0-12W.html

댓글 없음:

댓글 쓰기