IT업계에서 자신만의 위치를 찾으려면 자격증을 많이 취득하는것이 큰 도움이 될것입니다. Microsoft 인증 70-505-Csharp시험은 아주 유용한 시험입니다. Microsoft 인증70-505-Csharp시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는Microsoft 인증70-505-Csharp시험대비덤프를 출시하였습니다. ITExamDump에서 제공해드리는Microsoft 인증70-505-Csharp시험덤프는 시장에서 판매하고 있는Microsoft 인증70-505-Csharp덤프중 가장 최신버전덤프로서 덤프에 있는 문제만 공부하시면 시험통과가 쉬워집니다.
경쟁이 치열한 IT업계에서 굳굳한 자신만의 자리를 찾으려면 국제적으로 인정받는 IT자격증 취득은 너무나도 필요합니다. Microsoft인증 70-505-Csharp시험은 IT인사들중에서 뜨거운 인기를 누리고 있습니다. ITExamDump는 IT인증시험에 대비한 시험전 공부자료를 제공해드리는 전문적인 사이트입니다.한방에 쉽게Microsoft인증 70-505-Csharp시험에서 고득점으로 패스하고 싶다면ITExamDump의Microsoft인증 70-505-Csharp덤프를 선택하세요.저렴한 가격에 비해 너무나도 높은 시험적중율과 시험패스율, 언제나 여러분을 위해 최선을 다하는ITExamDump가 되겠습니다.
Microsoft인증 70-505-Csharp시험을 패스해서 자격증을 취득하려고 하는데 시험비며 학원비며 공부자료비며 비용이 만만치 않다구요? 제일 저렴한 가격으로 제일 효과좋은ITExamDump 의 Microsoft인증 70-505-Csharp덤프를 알고 계시는지요? ITExamDump 의 Microsoft인증 70-505-Csharp덤프는 최신 시험문제에 근거하여 만들어진 시험준비공부가이드로서 학원공부 필요없이 덤프공부만으로도 시험을 한방에 패스할수 있습니다. 덤프를 구매하신분은 철저한 구매후 서비스도 받을수 있습니다.
ITExamDump의 Microsoft인증 70-505-Csharp덤프는 거의 모든 실제시험문제 범위를 커버하고 있습니다.Microsoft인증 70-505-Csharp시험덤프를 구매하여 덤프문제로 시험에서 불합격성적표를 받을시ITExamDump에서는 덤프비용 전액 환불을 약속드립니다.
ITExamDump는 IT인증시험 자격증 공부자료를 제공해드리는 전문적인 사이트입니다. ITExamDump제품은 100%통과율을 자랑하고 있습니다. Microsoft인증 70-505-Csharp시험이 어려워 자격증 취득을 망설이는 분들이 많습니다. ITExamDump가 있으면 이런 걱정은 하지 않으셔도 됩니다. ITExamDump의Microsoft인증 70-505-Csharp덤프로 시험을 한방에 통과하여 승진이나 연봉인상에 도움되는 자격증을 취득합시다.
시험 번호/코드: 70-505-Csharp
시험 이름: Microsoft (TS: Microsoft .NET Framework 3.5, Windows Forms Application Development: 70-505Csharp Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 111 문항
업데이트: 2013-11-21
70-505-Csharp인증시험은Microsoft사의 인중시험입니다.Microsoft인증사의 시험을 패스한다면 it업계에서의 대우는 달라집니다. 때문에 점점 많은 분들이Microsoft인증70-505-Csharp시험을 응시합니다.하지만 실질적으로70-505-Csharp시험을 패스하시는 분들은 너무 적습니다.전분적인 지식을 터득하면서 완벽한 준비하고 응시하기에는 너무 많은 시간이 필요합니다.하지만 우리ITExamDump는 이러한 여러분의 시간을 절약해드립니다.
70-505-Csharp 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-505-Csharp.html
NO.1 You are creating a Windows Forms application by using the .NET Framework 3.5. You create a new
form named ConfigurationForm in the application. You add the following controls to the form. A
TabControl control named tbcConfigurationInformation along with two TabPage controls named
tabGeneralInfo and tabAdvancedSettingsA button control named btnShowAdvSettings You add the
following code segment in the form. (Line numbers are included for reference only.) 01 private void
ConfigurationForm_Load(object sender, EventArgs e)02 {03 this.btnShowAdvSettings.Click +=
new 04 EventHandler(btnShowAdvSettings_Click);05 06 }07 08 private void
btnShowAdvSettings_Click(object sender, EventArgs e)09 {10 11 } You are defining the initial
configuration and behavior of ConfigurationForm. You need to ensure that the following requirements are
met: The tabAdvancedSettings TabPage control is initially hidden when the Form is loaded.The
tabAdvancedSettings TabPage control is displayed when the btnShowAdvSettings button control is
clicked. What should you do?
A. Insert the following code segment at line 05. this.tabAdvancedSettings.Hide(); Insert the following code
segment at line 10. this.tabAdvancedSettings.Show();
B. Insert the following code segment at line 05.
tbcConfigurationInformation.TabPages.Remove(tabAdvancedSettings); Insert the following code
segment at line 10. tbcConfigurationInformation.TabPages.Add(tabAdvancedSettings);
C. Insert the following code segment at line 05.
tbcConfigurationInformation.SelectTab(tabAdvancedSettings);tbcConfigurationInformation.SetVisibleCor
e(false); Insert the following code segment at line 10.
tbcConfigurationInformation.SelectTab(tabAdvancedSettings);tbcConfigurationInformation.SetVisibleCor
e(true);
D. Insert the following code segment at line 05. this.tabAdvancedSettings.Invalidate(false); Insert the
following code segment at line 10. this.tabAdvancedSettings.Invalidate(true);
Answer: B
Microsoft기출문제 70-505-Csharp 70-505-Csharp 70-505-Csharp덤프
NO.2 You are creating a Windows Forms application by using the .NET Framework 3.5. You create a new
form in the application. You add a ContextMenuStrip control named ctxMenu to the form. You have a
user-defined class named CustomControl. You write the following code segment in the application. (Line
numbers are included for reference only.) 01 CustomControl myControl = new CustomControl();02 You
need to ensure that an instance of CustomControl is displayed on the form as a top-level item of the
ctxMenu control. Which code segment should you add at line 02?
A. ToolStripControlHost host = new ToolStripControlHost(myControl);ctxMenu.Items.Add(host);
B. ToolStripPanel panel = new
ToolStripPanel();panel.Controls.Add(myControl);ctxMenu.Controls.Add(panel);
C. ToolStripContentPanel panel = new
ToolStripContentPanel();panel.Controls.Add(myControl);ctxMenu.Controls.Add(panel);
D. ToolStripMenuItem menuItem = new ToolStripMenuItem();ToolStripControlHost host = new
ToolStripControlHost(myControl);menuItem.DropDownItems.Add(host);ctxMenu.Items.Add(menuItem);
Answer: A
Microsoft dumps 70-505-Csharp 70-505-Csharp
NO.3 You are creating a Windows Forms application by using the .NET Framework 3.5. The application
requires a form to display a clock. You need to create a circular form to display the clock. Which code
segment should you use?
A. this.FormBorderStyle =
System.Windows.Forms.FormBorderStyle.None;System.Drawing.Drawing2D.GraphicsPath path = new
System.Drawing.Drawing2D.GraphicsPath();path.AddEllipse(0, 0, this.Width, this.Height);Region reg =
new Region();this.Region = reg;
B. this.FormBorderStyle =
System.Windows.Forms.FormBorderStyle.FixedSingle;System.Drawing.Drawing2D.GraphicsPath path =
new System.Drawing.Drawing2D.GraphicsPath();path.AddEllipse(0, 0, this.Width, this.Height);Region reg
= new Region(path);this.Region = reg;
C. this.FormBorderStyle =
System.Windows.Forms.FormBorderStyle.None;System.Drawing.Drawing2D.GraphicsPath path = new
System.Drawing.Drawing2D.GraphicsPath();path.AddEllipse(0, 0, this.Width, this.Height);Region reg =
new Region(path);this.Region = reg;
D. this.FormBorderStyle =
System.Windows.Forms.FormBorderStyle.FixedSingle;System.Drawing.Drawing2D.GraphicsPath path =
new System.Drawing.Drawing2D.GraphicsPath();path.AddEllipse(0, 0, this.Width, this.Height);Region
reg = new Region();this.Region = reg;
Answer: C
Microsoft 70-505-Csharp dumps 70-505-Csharp dump 70-505-Csharp
NO.4 You are creating a Windows Forms application by using the .NET Framework 3.5. You create a new
form in your application. You add 100 controls at run time in the Load event handler of the form. Users
report that the form takes a long time to get displayed. You need to improve the performance of the form.
What should you do?
A. Call the InitLayout method of the form before adding all the controls.Call the PerformLayout method of
the form after adding all the controls.
B. Call the InitLayout method of the form before adding all the controls.Call the ResumeLayout method of
the form after adding all the controls.
C. Call the SuspendLayout method of the form before adding all the controls.Call the PerformLayout
method of the form after adding all the controls.
D. Call the SuspendLayout method of the form before adding all the controls.Call the ResumeLayout
method of the form after adding all the controls.
Answer: D
Microsoft 70-505-Csharp 70-505-Csharp 70-505-Csharp최신덤프 70-505-Csharp자료
NO.5 You are creating a Windows Forms application by using the .NET Framework 3.5. You create a new
form in your application. You add a PrintDocument control named pntDoc to the form.
To support the print functionality, you write the following code segment in the application. (Line numbers
are included for reference only.) 01 pntDoc.BeginPrint +=
new PrintEventHandler(PrintDoc_BeginPrint);02 ...03 bool canPrint = CheckPrintAccessControl();04 if
(!canPrint) {05 06 }07 You need to ensure that the following requirements are met: When the user has
no print access, font and file stream initializations are not executed and the print operation is
cancelled.Print operations are logged whether or not the user has print access. What should you do.?
A. Add the following code segment at line 05. pntDoc.BeginPrint -= new
PrintEventHandler(PrintDoc_BeginPrint);pntDoc.BeginPrint += new PrintEventHandler((obj, args) =>
args.Cancel = true); Add the following code segment at line 07. pntDoc.BeginPrint += new
PrintEventHandler((obj1, args1) => LogPrintOperation());
B. Add the following code segment at line 05. pntDoc.BeginPrint += new
PrintEventHandler(delegate(object obj, PrintEventArgs args){}); Add the following code segment at line
07. pntDoc.BeginPrint -= new PrintEventHandler(PrintDoc_BeginPrint);pntDoc.BeginPrint += new
PrintEventHandler((obj1, args1) => LogPrintOperation());
C. Add the following code segment at line 05. pntDoc.BeginPrint -= new
PrintEventHandler(PrintDoc_BeginPrint);pntDoc.BeginPrint -= new PrintEventHandler(delegate(object
obj, PrintEventArgs args){}); Add the following code segment at line 07. pntDoc.BeginPrint -= new
PrintEventHandler((obj1, args1) => LogPrintOperation());
D. Add the following code segment at line 05. pntDoc.BeginPrint -= new PrintEventHandler((obj, args)
=> args.Cancel = true); Add the following code segment at line 07. pntDoc.BeginPrint += new
PrintEventHandler(PrintDoc_BeginPrint);pntDoc.BeginPrint -= new PrintEventHandler((obj1, args1) =>
LogPrintOperation());
Answer: A
Microsoft 70-505-Csharp 70-505-Csharp자료 70-505-Csharp dumps
ITexamdump의 HP2-N40덤프의 VCE테스트프로그램과 700-101덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 VCPC510시험에 대비한 고품질 덤프와 LOT-958시험 최신버전덤프를 제공해드립니다. 최고품질 JN0-380시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기